Intermec Trakker Antares 2460, User Manual

Page: 223 / 291

Nugg
C d 39
Configuration Command Reference
8-75
8
3. Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
Scanner Trigger
Purpose: Scanner trigger allows you to set level triggering or edge triggering.
•
With level triggering, you activate the scanner and the laser turns on and stays on
until you release the trigger on the laser scanner.
•
In edge triggering, you activate the scanner and the laser turns on and stays on.
When you activate the scanner a second time, the laser turns off. Simply releasing
the trigger does not turn the laser off. If the laser is left on, the scanner timeout
turns the laser off.
Syntax: SCdata
Acceptable values for data are:
0 Level triggering
1 Edge triggering
Default: Level triggering
Scan: One of these bar codes:
Enable Level Triggering
*$+SC0*
*$+SC0*
Enable Edge Triggering
*$+SC1*
*$+SC1*