Intermec Trakker Antares 2460, User Manual

Page: 180 / 291

TRAKKER Antares 246X Stationary Terminal User’s Manual Nugg
C d 39
8-32
Data Bits
Purpose: Sets the number of data bits the terminal uses when communicating with another device
(i.e., host computer) through the serial port.
Syntax: YIn.data
where n is:
1 COM1 port
2 COM2 port
Acceptable values for data are:
7 7 data bits
8 8 data bits
Default: 7
Scan: To set the default data bits, scan one of these bar codes:
Default Data Bits for COM1
*$+YI1.7*
*$+YI1.7*
Default Data Bits for COM2
*$+YI2.7*
*$+YI2.7*
Or: To set the data bits:
1. Scan this bar code:
Enter Accumulate Mode / Set Data Bits
*+/$+YI*
*+/$+YI*
2. Scan one of these bar codes to set the COM port:
COM1 COM2
*1.* *2.*
*1.* *2.*