Intermec Trakker Antares 2460, User Manual

Page: 177 / 291

Nugg
C d 39
Configuration Command Reference
8-29
8
Scan: To set the default configuration, scan one of these bar codes:
Default Configuration for COM1
*$+YT1.2*
*$+YT1.2*
Default Configuration for COM2
*$+YT2.2*
*$+YT2.2*
Or: To set the configuration commands:
1. Scan this bar code:
Enter Accumulate Mode / Set Configuration Commands Via Serial Port
*+/$+YT*
*+/$+YT*
2. Scan one of these bar codes to set the COM port:
COM1 COM2
*1.* *2.*
*1.* *2.*
3. Scan the configuration command:
Disabled Enabled With TMF
*0* *1*
*0* *1*
Enabled Without TMF
*2*
*2*
4. Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
5. Repeat Steps 1 through 4 to set the configuration commands via serial port for
another serial port.