Intermec Trakker Antares 2460, User Manual

Page: 93 / 291

nugget
39
Programming the Terminal
5-5
5
246X Stationary Terminal Specifications
Products
TRAKKER Antares 2460 and 2461 stationary terminals
Serial communications
RS-232 serial communications via COM1
RS-232/422/485 serial communications via COM2 (2460 only)
Network protocol
There are two options for the 2461:
•
UDP Plus provides host connectivity through the DCS 300
•
TCP/IP `provides host connectivity through the Ethernet network
Application
Programmed in Microsoft C, customer defined, stored on drive C. Maximum size of a
single application is 512K (less the size of the RAM drive, if configured).
Application name
Customer defined, eight characters with three-character extension
Storing applications
Multiple (maximum depends on the drive space)
Developing applications
Using TRAKKER Antares Programmer’s Software Kit or EZBuilder
Downloading applications
Via RS-232/422/485 serial communications from the PC or host computer
Via Ethernet to the 2461 terminal’s flash drive from the DCS 300
Via Ethernet and TFTP to the 2461 terminal’s flash drive from a host application
Drives and file system
Drive C, approximately 750K flash for user, up to 32 files
Drive D, optional 2MB (of the total 4MB) configurable flash memory storage, up to 32
files
Drive E, configurable (up to 256K) RAM disk, up to 32 files