Intermec Trakker Antares 2460, User Manual

Page: 252 / 291

TRAKKER Antares 246X Stationary Terminal User’s Manual nugget
39
A-10
Default Configuration for Ethernet Network Communications
Parameter Default
Controller IP Address 0.0.0.0
Default Router 0.0.0.0
Dynamic Host Configuration Protocol (DHCP) Disabled
Host IP Address 0.0.0.0
Network Activate Disabled
Network Port 23 (Telnet) for a TCP/IP network
5555 for a UDP Plus network
Subnet Mask 255.255.255.0
TCP Maximum Retries 12
TCP/IP Maximum Transmit Timeout 20 seconds
Terminal IP Address 0.0.0.0
Default Configuration for Serial Network Communications
Parameter Default
Baud Rate 19200
Configuration Commands Via Serial Port Enabled without TMF
Data Bits 7
End of Message (EOM) \x03 (hexadecimal value for ETX)
Flow Control None
Handshake Disabled
LRC (Longitudinal Redundancy Check) Disabled
Multi-Drop Address A
Parity Even
Poll (Polling) Disabled
RS-232 or RS-422/485 COM2 Interface RS-232
Serial Port Protocol Configurable
Start of Message (SOM) \x02 (hexadecimal value for STX)
Stop Bits 1
Timeout Delay 10 seconds