Intermec Trakker Antares 2460, User Manual

Page: 157 / 291

Nugg
C d 39
Configuration Command Reference
8-9
8
Baud Rate
Purpose: Sets the baud rate for the serial port(s) on the terminal. The baud rate must match the
baud rate of the device (i.e., the host computer) that the terminal is communicating with
through the serial port.
Syntax: YAn.data
where n is:
1 COM1 serial port
2 COM2 serial port
Acceptable values for data are:
3 1200 baud
4 2400 baud
5 4800 baud
6 9600 baud
7 19200 baud
8 38400 baud
Default: 19200
Scan: To set the default baud rate, scan one of these bar codes:
Default Baud Rate for COM1
*$+YA1.7*
*$+YA1.7*
Default Baud Rate for COM2
*$+YA2.7*
*$+YA2.7*
Or: To set the baud rate:
1. Scan this bar code:
Enter Accumulate Mode/Set Baud Rate
*+/$+YA*
*+/$+YA*