Intermec Trakker Antares 2460, User Manual

Page: 254 / 291

TRAKKER Antares 246X Stationary Terminal User’s Manual nugget
39
A-12
Configuration Commands by Syntax (continued)
Syntax Command For Help, See Page
FRdata RAM Drive Size 8-66
HBdata Poll (Polling) 8-62
IAdata Baud Rate 8-9
IBdata Parity 8-60
ICdata Stop Bits 8-79
IEdata Timeout Delay 8-89
IFdata LRC (Longitudinal Redundancy Check) 8-54
IIdata Data Bits 8-32
ILdata Flow Control 8-40
ITdata Configuration Commands Via Serial Port 8-28
KAdata Keypad Caps Lock 8-52
KCdata Keypad Clicker 8-53
NAdata Network Activate 8-57
NCdata Controller IP Address (UDP Plus network) 8-30
NCdata Host IP Address (TCP/IP network) 8-43
NDdata Terminal IP Address 8-85
NGdata Network Port 8-58
NHdata TCP/IP Maximum Transmit Timeout 8-84
NIdata Dynamic Host Configuration Protocol (DHCP) 8-36
NJdata TCP Maximum Retries 8-83
NSdata Subnet Mask 8-80
NXdata Default Router 8-34
PEdata Start of Message (SOM) (COM1 only) 8-78
PFdata End of Message (EOM) (COM1 only) 8-37
PGdata Handshake (COM1 only) 8-42
SAdata Scanner Timeout 8-74
SBdata Scanner Mode 8-71
SCdata Scanner Trigger 8-75
SDdata Scan Ahead 8-70
SRdata Scanner Redundancy 8-72