Intermec Trakker Antares 2460, User Manual

Page: 238 / 291

TRAKKER Antares 246X Stationary Terminal User’s Manual Nugg
C d 39
8-90
Timeout Delay (continued)
2. Scan one of these bar codes to set the COM port:
COM1 COM2
*1.* *2.*
*1.* *2.*
3. Scan one of these bar codes for the timeout delay:
Timeout Delay 5 ms Timeout Delay 100 ms
*0* *1*
*0* *1*
Timeout Delay 500 ms Timeout Delay 2 sec
*2* *3*
*2* *3*
Timeout Delay 10 sec Timeout Delay 20 sec
*4* *5*
*4* *5*
Timeout Delay 40 sec Timeout Delay 60 sec
*6* *7*
*6* *7*
4. Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
Notes: For COM1 only, you can use either command syntax listed next:
Syntax: YE1.data
Or: IEdata
where data is a value from 0 to 7. For COM2, you must use the YE configuration
command.