Intermec Trakker Antares 2460, User Manual, Page: 189 / 291

Nugg
C d 39
Configuration Command Reference
8-41
8
Or: To set the flow control:
1. Scan this bar code:
Enter Accumulate Mode / Set Flow Control
*+/$+YL*
*+/$+YL*
2. Scan one of these bar codes to set the COM port:
COM1 COM2
*1.* *2.*
*1.* *2.*
3. Scan the flow control setting:
None CTS Checking
*0* *1*
*0* *1*
XON/XOFF Response XON/XOFF Control
*2* *3*
*2* *3*
XON/XOFF Response and Control CTS/RTS for DTE-DTE
*4* *5*
*4* *5*
4. Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
Notes: For COM1 only, you can use either command syntax listed next:
Syntax: YL1.data
Or: ILdata
Where data is one or two ASCII characters. For COM2, you must use the YL
configuration command.