Intermec Trakker Antares 2460, User Manual

Page: 174 / 291

TRAKKER Antares 246X Stationary Terminal User’s Manual Nugg
C d 39
8-26
Command Processing (continued)
Or: To disable or enable specific reader commands, perform these steps:
1. Scan this bar code:
Enter Accumulate Mode / Command Processing
*+/$+DC*
*+/$+DC*
2. Scan the bar code to disable or enable one reader command.
Note: If there are two bar codes for a reader command, you must scan them in
order, left to right. Accumulate mode commands are separated into two bar codes
so that the command can be accumulated rather than executed as a command.
Abort Program
*/$*
*/$*
Backspace (continued)
*-* *+*
*-* *+*
Boot Terminal Change Configuration
*-.1* *$+*
*-.* *$+*
Clear (continued)
*-* *-*
*-* *-*
Default/Save Configuration Delete File
*.+* *..--*
*.+* *..--*
Enter Accumulate Mode (continued)
*+* */*
*+* */*
Exit Accumulate Mode (continued)
*-* */*
*-* */*