Intermec Trakker Antares 2460, User Manual

Page: 109 / 291

Nugget
C d 39
Troubleshooting
6-3
6
This chapter lists the problems you may have while using the terminal and gives
some possible solutions. You will also find instructions that explain how to boot and
reset the terminal.
Finding and Solving Problems
If you have a problem while configuring or using the terminal, use the tables in this
section to find a solution. For easy reference, problems are grouped into these topics:
•
Problems While Operating the Terminal
•
Problems While Configuring the Ethernet Network
•
Problems While Configuring the Serial Network
•
Problems While Scanning Configuration Commands
•
2461 Will Not Communicate With Ethernet Network Devices
•
Problems Transmitting Data Through the Serial Port
•
Problems Transmitting Data Through the DCS 300
•
Bar Code Labels Will Not Scan
Caution
There are no user-serviceable parts inside the terminal. Opening the unit will void
the warranty and may cause damage to the internal components.
Conseil
La terminal ne contient pas de pièces révisibles par l’utilisateur. Le fait d’ouvrir
l’unité annule la garantie et peut endommager les pièces internes.
If you send the terminal in for service, it is your responsibility to save the terminal data
and configuration. Intermec is responsible only for ensuring that hardware features
match the original configuration when repairing or replacing your terminal.