Intermec Trakker Antares 2460, User Manual

Page: 125 / 291

nugget
39
Reader Command Reference
7-5
7
Or, to edit the accumulated data, scan one of these bar code labels:
Backspace Clear Enter
*-+* *--* **
*-+* *- -* **
Note: You can create one bar code label by combining Steps 1 and 2 above. Most
of the examples in this manual use one bar code label.
3. Scan this bar code label to exit Accumulate mode and enter the data record.
Exit Accumulate Mode
*-/*
*-/*
Enter Accumulate Mode
Purpose: Enters Accumulate mode. You can accumulate data from a series of bar code labels and
enter them as a single label.
From Network: Not supported
Scan: Enter Accumulate Mode
*+/*
*+/*
Backspace
Purpose: Deletes the last character from the current data record being accumulated. If there is no
data in the buffer, the command has no effect.
From Network: Not supported
Scan: Backspace
*-+*
*-+*