Intermec Trakker Antares 2460, User Manual

Page: 283 / 291

Index
I-5
I
communications (continued)
serial port
configuration commands, list of, A-10
connecting, 4-6
using, 4-6
troubleshooting, 6-9
communications port, See COM port
Configurable Serial Protocol, defined, 4-6, 4-27
configuration commands
AFF, 8-42
Append Time, 8-7
Automatic Shutoff, 8-7
Baud Rate, 8-9
Beep Volume, 8-11
category, listed by, 8-4
character set, 8-12
Codabar, 8-14
Code 11, 8-15
Code 128, 8-24
Code 16K, 8-16
Code 2 of 5, 8-17
Code 39, 8-18
Code 49, 8-22
Code 93, 8-23
Command Processing, 8-25 to 8-28
Configuration Commands Via Serial Port, 8-28
configuring
from DCS 300, 4-16
from host, 4-9
overview of, 3-3
Controller IP Address, 8-30
Data Bits, 8-32
Decode Security, 8-33
Default Router, 8-34
default settings, list of, A-8 to A-10
Dynamic Host Configuration Protocol, 8-36
EOM, 8-37
Flash Memory Configuration, 8-39
Flow Control, 8-40
Handshake, 8-42
Host IP Address, 8-43
Interleaved 2 of 5, 8-45
ISBT Code 128, 8-47
Keypad Caps Lock, 8-52
Keypad Clicker, 8-53
LRC, 8-54
MSI, 8-55
Multi-Drop Address, 8-56
Network Activate, 8-57
Network Port, 8-58
Parity, 8-60
Plessey, 8-61
Poll, 8-62
Postamble, 8-64
Preamble, 8-65
RAM Drive Size, 8-66
Resume Execution, 8-68
RS-232 or RS-422/485 COM2 Interface, 8-69
Scan Ahead, 8-70
Scanner Mode, 8-71
Scanner Redundancy, 8-72
Scanner Selection, 8-73
Scanner Timeout, 8-74
Scanner Trigger, 8-75
scanning labels to configure the terminal, 3-5
Serial Port Protocol, 8-76
SOM, 8-78
Stop Bits, 8-79
Subnet Mask, 8-80
Suspend/Resume Control, 8-82
syntax, listed by, A-11
TCP/IP Maximum Retries, 8-83
TCP/IP Maximum Transmit Timeout, 8-84
Terminal IP Address, 8-85
Time and Date, 8-87
Time in Seconds, 8-88
Timeout Delay, 8-89
troubleshooting, 6-6
UPC/EAN, 8-91
using, 8-3
variable data, entering, 8-6
Configuration Commands Via Serial Port command,
8-28
Configure Device Initialization Download dialog box,
5-15, 5-16
configuring
2.4 GHz RF network, overview, 4-12
2461 from the host, 4-17
bar code symbologies, 3-4, 3-7
booting the terminal on resume, 6-13
Change Configuration command, using, 7-8
DCS 300, 4-13
default configuration
command, using, 7-8
restoring, 3-10, 6-4
default settings, list of, A-8 to A-10
Ethernet parameters, 2-17
operating parameters, described, 3-5
overview of configuration parameters, 3-3
remotely
2461 from DCS 300, 4-16
network overview, 4-16
serial port, via, 4-9
Save Configuration command, using, 7-10
scanning bar code labels, 3-5
serial port parameters, 2-16, 4-7, 4-8, 4-9
summary of methods, 3-3
the terminal for your network, 2-14
time and date, 2-14