Intermec Trakker Antares 2460, User Manual

Page: 197 / 291

Nugg
C d 39
Configuration Command Reference
8-49
8
Or: To configure ISBT Code 128:
Note: To scan the following bar codes, you must configure the terminal to use Code 39
in Full ASCII mode. For help, see “Code 39” earlier in this chapter.
1. Scan this bar code:
Enter Accumulate Mode / Enable ISBT Code 128
*/K/O/D/KCH8*
*+/$+CH8*
2. Scan one of these bar codes to disable or enable symbology ID:
Symbology ID Disabled Symbology ID Enabled
*0* *1*
*0* *1*
Note: Steps 3 through 9 are optional.
3. Scan one of these bar codes to disable or enable concatenation:
Disable Concatenation Enable Concatenation
*0* *1*
*0* *1*
If you disabled concatenation, go to Step 10.
4. Scan one of these bar codes to set the Left Data ID:
Blood Groups and Rh Expiration Date
*%H/E* *%H%I*
*=%* *=>*
Expiration Date and Time Collection Date
*/F%I* *%H/J*
*&>* *=**
Collection Date and Time ISBT Product Code
*/F/J* *%H%G*
*&** *=<*
Manufacturer ID Manufacturer Lot Number
*%H/I* */F/I*
*=)* *&)*