Intermec Trakker Antares 2460, User Manual

Page: 171 / 291

Nugg
C d 39
Configuration Command Reference
8-23
8
Or: To set one of the function codes to a character string:
1. Scan one of these bar codes:
Enter Accumulate Mode / Set Function Code 1
*+/$+CK*
*+/$+CK*
Enter Accumulate Mode / Set Function Code 2
*+/$+CL*
*+/$+CL*
Enter Accumulate Mode / Set Function Code 3
*+/$+CM*
*+/$+CM*
2. Scan any character from the “Full ASCII Bar Code Chart” in Appendix B. You can
define two characters each for Function Codes 1 and 3, and four characters for
Function Code 2.
3. Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
Code 93
Purpose: Enables or disables decoding of Code 93 symbology. Code 93 is a variable length,
continuous symbology that uses four element widths.
Syntax: CFdata
Acceptable values for data are:
0 Disabled
1 Enabled
Default: Disabled
Scan: One of these bar codes:
Disable Code 93 Enable Code 93
*$+CF0* *$+CF1*
*$+CF0* *$+CF1*