Intermec Trakker Antares 2460, User Manual

Page: 73 / 291

nugget
39
Operating the Terminal in a Network
4-15
4
Using the Status Lights to Monitor Network Communications
You See These Lights Status of Communications What You Need to Do
Network Connect status
light is turned off. No communications.
The 2461 is not connected to the
Ethernet network.
You may need to enable the Network
Activate command. Make sure the terminal
is configured correctly to communicate in
your network. For help, see “Configuring
the 2461 Terminal” earlier in this chapter.
The Network Connect
status light blinks.
Partial communications.
The 2461 with UDP Plus is trying to
establish communications with the DCS
300, but it is not connected.
Note: The Network Connect status light
does not blink on a 2461 with the TCP/IP
protocol.
You may need to configure the terminal to
communicate with other devices in the
Ethernet network. For help, see
“Configuring the 2461 Terminal” earlier in
this chapter.
You may also need to configure the server
(UDP Plus) or host. Make sure the terminal
is configured correctly and enabled. Make
sure the server is turned on and data
collection is started.
The Network Connect
status light remains on.
Normal communications. The 2461 can
communicate with the DCS 300 (UDP
Plus) or host (TCP/IP). You can send and receive data between the
terminal and the server or host.