IBM SAN32M-2, Installation And Service Manual

Page: 258 / 312

SAN32M-2 Installation and Service Manual 232
Event code: 083
Message: Port set to inactive state.
Severity: Informational.
Explanation: A hardware or software problem prevented the port from coming online and set the port to an inactive state. Refer
to event data for the inactive reason
Action: Action depends on inactive reason specified.
Event data: The first byte of event data (byte 0 ) specifies the port number. The second byte (byte 1 ) specifies the inactive
reason code as follows:
2 = Feature key not enabled - The optional flexport PFE key is not enabled.
3 = Switch speed conflict - The port cannot operated at the configured product (backplane or CTP Card) speed.
4 = Optics speed conflict - The port transceiver does not support the configured port speed.
5 = No SBAR - A serial crossbar (SBAR) is not installed. Not applicable to IBM 2026 type switches.
6 = Port swap conflict - The port swap configuration is invalid.
Distribution: Product Management Server Host
EFCM Basic
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Log
Event code: 120
Message: Error detected while processing system management command.
Severity: Informational.
Explanation: This event occurs when the switch receives a management command that violates specified boundary
conditions, typically as a result of a network error. The switch rejects the command, drops the switch-to-server
Ethernet link, and forces error recovery processing. When the link recovers, the command can be retried.
Action: No action is required for an isolated event. If this event persists, perform a data collection and return the CD to
support personnel.
Event data: No supplementary data included.
Distribution: Product Management Server Host
EFCM Basic
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Log