IBM SAN32M-2, Installation And Service Manual

Page: 186 / 312

SAN32M-2 Installation and Service Manual 160
•
Operational State -
Port state ( Online , Offline , Not Installed ,
Inactive , Invalid Attachment , Link Reset , No Light , Not Operational ,
Port Failure , Segmented E_Port , or Testing ).
• Type - Port type, including generic mixed port ( GX_Port ), fabric
mixed port ( FX_Port ), generic port ( G_Port ), fabric port ( F_Port ),
or expansion port ( E_Port ).
• Health Status - Condition of the installed optical transceiver
( Normal , Warning , Alarm , or No Info ).
• Transceiver - Installed transceiver type ( SFP , XFP , or Unknown ).
Inspect Port Properties
At the Port List View , click a physical port number listed in the Port
column. Physical properties for the selected port appear in the lower
panel of the view:
• Port Number - Product port number.
• Port Name - User-defined name or description for the port.
•
Port Type -
User-defined port type ( GX_Port , FX_Port , G_Port ,
F_Port , or E_Port ).
• Operating Speed - Port operating speed ( Not Established , 1 Gbps ,
2 Gbps , or 4 Gbps ).
• Fibre Channel Address - Port FC address identifier. Port FC
address if the port was swapped.
• Port WWN - Fibre Channel world wide name (WWN) of the port.
•
Attached Port WWN -
Fibre Channel WWN of the device
attached to the port.
• Block Configuration - User-configured state for the port ( Blocked
or Unblocked ).
• Beaconing - User-specified for the port ( On or Off ).
• FAN Configuration - User-configured state for fabric address
notification (FAN) configuration ( Enabled or Disabled ).
• Operational State - Port state ( Online , Offline , Not Installed ,
Inactive , Invalid Attachment , Link Reset , No Light , Not Operational ,
Port Failure , Segmented E_Port , Disabled , or Testing ).
• Reason - A summary appears describing the reason if the port
state is Segmented E_Port , Invalid Attachment , or Inactive . For any
other port state, the reason is N/A .