IBM SAN32M-2, Installation And Service Manual

Page: 202 / 312

SAN32M-2 Installation and Service Manual 176
•
Event Data -
Supplementary information (if available) in
hexadecimal format. Event data is described in Appendix A,
Event code tables .
Hardware Log
The Hardware Log records a history of part removals and
replacements (insertions) for the switch. The log describes:
• Date/Time - Date and time the part was inserted or removed.
•
FRU -
Acronym representing the FRU type. ( FRU refers to
field-replaceable units or part.)
• Position - Number representing the part chassis position. The
chassis (slot) position for a nonredundant CTP card is 0 . Chassis
slots for redundant power supplies are 0 and 1 .
•
Action -
Action performed ( Inserted or Removed ).
• Part Number - Part number of the inserted or removed part.
•
Serial Number -
Serial number of the inserted or removed part.
Link Incident Log
The Link Incident Log records Fibre Channel link incident events and
causes. The log describes:
• Date/Time - Date and time the link incident occurred.
• Port - Port number reporting the link incident.
• Link Incident Event - Brief description of the link incident and
cause, including:
— Implicit incident.
— Bit-error threshold exceeded.
— Loss of signal or loss of synchronization.
— Not-operational primitive sequence received.
— Primitive sequence timeout.
— Invalid primitive sequence received for current link state.
Refer to MAP 0500: Port failure or link incident analysis for corrective
actions.
Port Threshold
Alert Log
The Port Threshold Alert Log records a history of threshold alert
notifications. The log describes:
• Date/Time - Date and time the alert occurred.