![background image](http://html1.mh-extra.com/html/ibm/san32m-2/san32m-2_installation-and-service-manual_3506376060.webp)
SAN32M-2 Installation and Service Manual
34
a. Close the EFCM Basic Edition interface and all browser
applications.
b. At the Windows desktop, click
Start
at the left side of the task
bar. The
Windows Workstation
menu displays.
c. At the
Windows Workstation
menu, sequentially select the
Programs
and
Command Prompt
options. A disk operating
system (DOS) window displays.
d. Delete the switch’s
old
IP address from the ARP table. At the
command (
C:\
) prompt, type
arp -d
xxx.xxx.xxx.xxx
, where
xxx.xxx.xxx.xxx
is the old IP address for the switch.
e. Click close (
X
) at the upper right corner of the DOS window to
close the window and return to the Windows desktop.
4. At the product front panel, press and hold the
IML/RESET
button for ten seconds to perform a power-on reset (POR).
5. At the PC, launch the browser application (Netscape Navigator
or
Internet Explorer). Enter the products’s
new
IP address as the
Internet URL. The
Enter Network Password
dialog box displays.
6. Type the case-sensitive user name and password and click
OK
.
The EFCM Basic Edition interface opens and the
Topology View
displays with status information about each fabric element.
Configure basic port information
Perform this procedure to configure basic port information.
1. Select
Ports
and
Basic Info
from the
Configure
menu at any view.
The
Basic Information View
displays (
Figure 16
).
a. For each port to be configured, type a port name of 24
alphanumeric characters or less in the
Name
field. The port
name should characterize the device to which the port is
attached.
b. Click a check box in the
Blocked
column to block or unblock a
port (default is unblocked). A check mark indicates a port is
blocked.
c. Click the check box in the
FAN
column to enable or disable the
fabric address notification (FAN) feature (default is enabled).
A check mark indicates FAN is enabled. When enabled, an
FL_Port transmits FAN frames after loop initialization to
verify FC-AL devices are still logged in.
Summary of Contents for SAN32M-2
