79
Chapter 2: Installation tasks
Figure 40
Configure SNMP dialog box
a. Click
Enable SNMP Agent
and
Enable Authentication Traps
to
activate the installed agent and enable transmission of SNMP
trap messages to recipients.
b. Select the appropriate FA MIB from the
Fibre Alliance MIB Trap
Version
drop-down list. Valid selections are
FA MIB Version
3.0
or
FA MIB Version 3.1
.
c. For each configured recipient, type a community name of 32
alphanumeric characters or less in the
Community Name
field.
The name is incorporated in SNMP trap messages to ensure
against unauthorized viewing.
d. Click (check) the box in the
Write Authorization
column to
enable write authorization for the trap recipient (default is
disabled). When enabled, a configured user can change
sysContact
,
sysName
, and
sysLocation
SNMP variables.
e. Type the IP address or DNS host name of the trap recipient
(SNMP management workstation) in the
Trap Recipient
field. It
is recommended the IP address be used.
f. Type a decimal port number in the
UDP Port Number
field to
specify the UDP port number
2. Click
Activate
to save the information and close the dialog box.
i24M1
174
Summary of Contents for SAN32M-2
