![background image](http://html1.mh-extra.com/html/ibm/san32m-2/san32m-2_installation-and-service-manual_3506376040.webp)
SAN32M-2 Installation and Service Manual
14
Figure 4
Door key
•
Loopback plug -
A multimode (shortwave laser) or singlemode
(longwave laser) loopback plug (
Figure 5
) is required to perform
port diagnostic tests. Loopback plugs are shipped with the
product, depending on the types of port transceivers installed.
Figure 5
Loopback plug
•
Fiber-optic protective plug -
For safety and port transceiver
protection, fiber-optic protective plugs (
Figure 6
) are inserted in
all product ports without fiber-optic cables attached. Products are
shipped with protective plugs installed.
Figure 6
Fiber-optic protective plug
•
Null modem cable -
An asynchronous RS-232 null modem cable
(
Figure 7
) is required to configure product network addresses and
acquire event log information through the product’s serial port.
The cable has nine conductors and DB-9 female connectors.
i14
0M
01
0
i140M212
i140M213
Summary of Contents for SAN32M-2
