IBM SAN32M-2, Installation And Service Manual

Page: 78 / 312

SAN32M-2 Installation and Service Manual 52
5. Type the default Windows user name and password and click OK .
The server’s Windows desktop opens and the SANavigator Log In
or EFCM Log In dialog box displays.
NOTE: The default Windows user name is Administrator and the
default password is password . Both are case-sensitive.
Configure management server names
To configure the management server name and workgroup name:
1. At the Windows desktop, click Start at the left side of the task bar
(bottom of the desktop), then sequentially select Settings , Control
Panel , and System . The System Properties dialog box displays with
the General tab open by default.
2. Click the Network Identification tab. The System Properties dialog
box displays with the Network Identification tab selected.
3. Click Properties . The Identification Changes dialog box displays
( Figure 23 ).
Figure 23
Identification Changes Dialog Box
i24M1
16
1