117
Chapter 3: Maintenance analysis procedures
21
The IP address defining the product to the SAN management
application is incorrect or unknown and must be verified. An
asynchronous RS-232 modem cable and maintenance terminal
(desktop or notebook PC) with a Windows-based operating system
and RS-232 serial communication software (such as ProComm Plus
or HyperTerminal) are required. To verify the IP address:
a. Using a Phillips screwdriver, remove the protective cap from the
9-pin maintenance port at the rear of the chassis. Connect one
end of the RS-232 modem cable to the port.
b. Connect the other cable end to a 9-pin serial communication port
(
COM1
or
COM2
) at the rear of the maintenance terminal PC.
c. Power on the maintenance terminal. At the Windows desktop,
click
Start
at the left side of the task bar. The
Windows
Workstation
menu displays.
d. At the
Windows Workstation
menu, sequentially select the
Programs
,
Accessories
,
Communications
, and
HyperTerminal
options. The
Connection Description
dialog box displays.
e. Type a descriptive product name in the
Name
field and click
OK
.
The
Connect To
dialog box displays.
f. Ensure the
Connect using
field displays
COM1
or
COM2
(depending on the port connection to the product), and click
OK
.
The
COMn Properties
dialog box displays, where
n
is
1
or
2
.
g. Configure
Port Settings
parameters:
—
Bits per second
-
115200
.
—
Data bits
-
8
.
—
Parity
-
None
.
—
Stop bits
-
1
.
—
Flow control
-
Hardware
or
None
.
Click
OK
. The
New Connection - HyperTerminal
window
displays.
h. At the
>
prompt, type the user password (default is
password
)
and press
Enter
. The password is case sensitive. The
New
Connection - HyperTerminal
window displays with software and
hardware version information for the product, and a
C >
prompt
at the bottom of the window.
Summary of Contents for SAN32M-2
