IBM SAN32M-2, Installation And Service Manual

Page: 193 / 312

167 Chapter 4: Repair information
Figure 51
Switch View
2. Perform one of the following:
— If the product is offline, click the green Activate button adjacent
to the Current Online State: field. The product comes online.
— If the product is online, click the green Deactivate button
adjacent to the Current Online State: field. The product goes
offline.
Block or unblock a port
This section describes procedures to block or unblock a Fibre Channel
port. Blocking a port prevents an attached device or fabric element
from communicating. A blocked port continuously transmits the
OLS. To block or unblock a port:
1. At the EFCM Basic Edition interface, select Ports and Basic Info
from the Configure menu at any view. The Basic Information View
displays ( Figure 52 ).
i1
6M2
01
0