IBM SAN32M-2, Installation And Service Manual

Page: 93 / 312

67 Chapter 2: Installation tasks
NOTE: PFE keys are encoded to work with the serial number of the installed
switch only. Record the key to re-install the feature if required. If the switch
fails and must be replaced, obtain new PFE keys from IBM. Please have the
serial numbers of the failed and replacement switches, and the old PFE key
number or transaction code.
After obtaining a PFE key, install the feature as follows:
1. Select Features from the Configure menu at any view. The Configure
Feature Key dialog box displays.
2. Click New . The New Feature Key dialog box displays ( Figure 32 ).
Figure 32
New Feature Key dialog box
3. Type the PFE key (case-sensitive xxxx-xxxx-xxxx-xx format) and
click OK . The Enable Feature Key dialog box displays.
4. Verify the feature description appears in the New Features panel
and click OK . A Warning dialog box displays with the message
Installing this feature key causes an IPL and momentary loss of
the LAN connection. The operation is nondisruptive to Fibre
Channel traffic. Do you wish to continue?
5. Click Yes to enable the PFE key and IPL the product. Close all
dialog boxes and return to the Element Manager application.
Task 16: Configure management server (optional)
Perform this procedure to configure the:
• Open systems management server - Implementing and enabling
OSI host control of the product requires installation of a SAN
management application on the OSI server. Applications include
Veritas SANPoint Control or Tivoli
NetView.
i24M1
171