SAN32M-2 Installation and Service Manual
30
Figure 13
Parameters View
b. At the
Rerouting Delay
field, check (enable) or uncheck
(disable) the parameter. When enabled, traffic is delayed
through the fabric by the user-specified error detect time out
value (E_D_TOV). This delay ensures Fibre Channel frames
are delivered to their destination in order.
c. At the
Domain RSCN
field, check (enable) or uncheck (disable)
the parameter. When enabled, attached devices can register to
receive notification when other devices change state.
d. At the
Suppress RSCN on Zone Set Activations
field, check
(enable) or uncheck (disable) the parameter. When enabled,
RSCNs are not transmitted when a zone set is activated.
e. At the
Limited Fabric RSCN
field, check (enable) or uncheck
(disable) the parameter. When enabled, RSCNs are not
transmitted after a product initial program load (IPL).
f. At the
Zone Flexpars: Isolate Fabric RSCNs on zone activation
changes
field, check (enable) or uncheck (disable) the
parameter. When enabled, zone FlexPars isolate and prevent
fabric-format RSCNs from propagating to devices in zones
that are not impacted.
g. At the
Preferred Domain ID
field, type a value between
1
through
31
. This value uniquely identifies each fabric element.
i24M1
134
Summary of Contents for SAN32M-2
