FluoroMax-3 v. 3.1 (3 Mar 2006)
System Operation
3-1
Note:
Each time the xenon lamp is ignited
adds one more hour to lamp use. HORIBA
Jobin Yvon Inc. suggests leaving the lamp
on between brief periods of inactivity.
3: System Operation
Introduction
This chapter explains how to turn on the FluoroMax
®
-3 system, check its calibration,
and, if necessary, recalibrate the monochromators. While doing these procedures, how
to define a scan, run a scan, and optimize system settings to obtain the best results is
explained.
Controls and indicators
Power switch
The power switch is located
on the lower right-hand side of
the instrument. When
switched on, the xenon lamp
arcs immediately, and the
FluoroMax
®
-3 turns on.
Lamp-on indicator
Once the lamp is operating
normally, the Spex
®
logo is
illuminated on the upper front
panel.
Hour meter
An hour meter is mounted on the lower right-hand side, to
monitor total usage of the xenon lamp.
Summary of Contents for FluoroMax-3
