horiba FluoroMax-3, Operation Manual, Page: 175 / 220

FluoroMax-3 v. 3.1 (7 Mar 2006) Components & Accessories
12-15
Note:
Selecting too high a
speed may create a vortex,
which could affect the re-
producibility
of the meas-
urement.
Note:
While the two-position
model maintains the tempera-
ture of both samples, only one
sample is mixed at a time.
Use
1
Place your sample in a 10 mm × 10 mm cuvette
and insert a magnetic stirring bar.
(The stirring bar is available from Bel-Art Products, Pequannock, NJ)
2
Place a cuvette in
each holder.
3
Allow the sample
to reach the
desired temperature.
4
Turn on the magnetic stirrer.
5
Select the
appropriate speed.
The speed at which the sample
should be mixed depends on the
viscosity of the sample.
6
Run your experiment
as usual.