Hitachi HF-W2000, Instruction Manual

Page: 93 / 325

2. OPERATION
2-21

Notes about the case when link down is recorded in the log during OS startup.
While Windows® is starting, the following warnings may be displayed in the event log.
These warnings are recorded by the initialization process of the LAN driver at the startup of
Windows® and will not cause any problems in the system operation.
Event ID Source Type Category Description(*1)
27
e1rexpress
Warning None
Intel(R) I210 Gigabit Network Connection(*1)
Network link is disconnected.(*2)
(*1) How the name is displayed differs depending on the LAN adapter
(*2) How the contents are displayed differs depending on the OS.
You can keep these warnings from being displayed in the event log by changing the LAN
adapter settings as follows.
Note that if you change the settings shown below, log entries such as LAN connection and
disconnection during system operation are also not recorded and that may make failure
analysis difficult when a problem occurs.
(The display image assumes Windows® 10 IoT but it is similar under other OS.)
1. Execute steps 1 though 5 in “  Setting the network transfer speed” in “2.8 Setting Up
the LAN Interface”.
2. Click the
Advanced
tab. Select
Log Link State Event
. Select
Disabled
from the
Value
list.