Hitachi HF-W2000, Instruction Manual

Page: 322 / 325

10. SOFTWARE RAID1
10-43
10.6.8 List of error message
This section lists error messages displayed by the software RAID utility and the corrective
actions for each item.
Table 10-3 Error Messages from the Software RAID utility
No Error Message Meaning Remedial action
1 Unreadable sector was
detected on the
Master .(Media error)
( Mirrored )
An unreadable sector was
detected on the
Master (or
Mirrored ). This is a media error.
When the sector in which a read error was
detected is read, the system may not operate
correctly because the information of the sector
is not rebuilt.
Back up data and replace the error drive, and
then rebuild the RAID.
After the RAID has been rebuilt, restore the
backup data.
2 Media error was occurred
on RAID. An unreadable sector was
detected in both drives during the
consistency check. This is a
media error.
Back up data and replace one drive, and then
rebuild the RAID. After that, also replace the
other drive and rebuild the RAID, and then
restore the backup data.
3 Unwritable sector was
detected on the
Master. Operation aborted.
( Mirrored )
An unwritable sector was
detected on the
Master (or
Mirrored ). Operation was
aborted.
Replace the error drive and rebuild the RAID.
4 The capacity of drive is
not equal. The capacity of the mounted
drive is different. Mount a drive with the same capacity.
5
Operation failed.
(EC=0xXXXXYYYYZZZ
ZZZZZ)
An internal error occurred.
XXXX: Error module
YYYY: Error processing
ZZZZZZZZ: Detailed error code Contact the sales staff of Hitachi.
6
Operation failed.
(EC=0xXXXXYYYYZZZ
ZZZZZ)
Click OK button to shut
down. An internal error occurred.
(Before a dialog box appears)
XXXX: Error module
YYYY: Error processing
ZZZZZZZZ: Detailed error code