6. CHECKUP AND MAINTENANCE
6-11
(4) Installing an extension board
[1] See “(3) Removing an extension board”, and remove the cover of the equipment and the
PCI cover.
[2] When installing an extension board to the slot 2 or the slot 3, see “(3) Removing an
extension board” or “6.3.5 Installing or removing an external control board” and
remove the slot 1 or the slot 2 if these slot are installed extension boards or external
control boards.
[3] Loosen the screw of the slot cover of the slot in which you want to install an extension
board, and remove the slot cover.
[4] Insert an extension board for the connector of the extension slot horizontally while
pushing the both ends of an extension board.
[5] Push a part right above the connector terminal of an extension board and insert an
extension board completely.
[6] Fix an extension board to the extension slot with a screw.
[7] Attach the cover of the equipment and the PCI cover.
Figure 6-5 Installing an extension board
[5]
[4]
[4]
Extension board
[6] The screw
The connector of
the extension slot
< NOTE >
When you install an extension board, the boards next to it may get knocked
loose. Check that those boards are inserted properly just to be sure.
Summary of Contents for HF-W2000
