Hill-Rom P870, Manual

Page: 58 / 231

Function Checks—Manual Drive Model
Chapter 2: Troubleshooting Procedures
Resident
TM
LTC Bed Service Manual (man136rc) Page 2 - 7
2
8. Turning the hilow (middle) hand crank counterclockwise, lower the bed to
its low position. The bed lowers evenly to its low position.
Yes No
↓ →
Go to RAP 2.4.
9. Turning the head (right) hand crank clockwise, raise the head section to its
greatest inclined position. The head of the bed raises fully and evenly to
approximately 60
O
as indicated by the head angle indicator decals located
on both sides of the bed.
Yes No
↓ →
Go to RAP 2.5.
10. Turning the head (right) hand crank counterclockwise, lower the head
section fully. The head section of the bed lowers fully and evenly to a flat
position.
Yes No
↓ →
Go to RAP 2.5.
11. Turning the knee (left) hand crank clockwise, raise the knee section to its
greatest inclined position. The knee section of the bed raises fully and
evenly to approximately 45
O
.
Yes No
↓ →
Go to RAP 2.6.
12. Turning the knee (left) hand crank counterclockwise, lower the knee
section fully. The knee section of the bed lowers fully and evenly to a flat
position.
Yes No
↓ →
Go to RAP 2.6.
13. Go to “Final Actions—Manual Drive Model” on page 2-8.