Hill-Rom P870, Manual

Page: 140 / 231

4.10 Control Lockout Box
Chapter 4: Removal, Replacement, and Adjustment Procedures
Resident
TM
LTC Bed Service Manual (man136rc) Page 4 - 33
4
4.10 Control Lockout Box
Tools required: Phillips head screwdriver Diagonal cutters
Removal
1. Unplug the bed from its power source.
SHOCK HAZARD:
Unplug the bed from its power source. An electrical shock hazard
exists.
2. Disconnect, if applicable, the left-hand siderail cable (A), right-hand
siderail cable (E), handset cable (D), and the automatic contour cable (C)
from the control lockout box (see figure 4-24 on page 4-33).
Figure 4-24. Location Of Control Lockout Box Cable Connections
3. Disconnect the power/hilow cable (B) from the control box mounted on top
of the hilow motor actuator (see figure 4-14 on page 4-17).
NOTE:
Record the cable routing and placement of cable ties for replacement purposes.
4. Remove the attached cable ties.
5. Remove the three screws (A) mounting the control lockout box to the foot
of the main frame (see figure 4-25 on page 4-34). Remove the control
lockout with the attached cable as an assembly.
A
B
C
D
E
m136_071