manualshive.com logo in svg

Hill-Rom P870, Manual

Share
Download
Hill-Rom P870 Manual Download Page 144

4.12  Siderails

Chapter 4: Removal, Replacement, and Adjustment Procedures

Resident

TM

 LTC Bed Service Manual (man136rc)

Page 4 - 37

4

4.12 Siderails

Tools required:

T25 torx head screwdriver

Diagonal cutters

Teflon

®

 lubricant (P/N SA0646)

Removal

The optional caregiver and resident controls can be mounted on the head end 
siderails.

1. Raise the bed to gain access to the underside of the sleep surface frame 

assembly.

2. If equipped with electrical components, unplug the bed from its power 

source.

SHOCK HAZARD:

Unplug the bed from its power source. An electrical shock hazard 
exists.

3. If the siderail has caregiver/resident controls, disconnect the siderail 

control cable (A) from the control lockout (see figure 4-27 on page 4-38).

NOTE:
Record the cable routing and placement of cable ties for replacement purposes.

4. Remove the attached cable ties. 

Summary of Contents for P870








































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands