Hill-Rom P870, Manual

Page: 26 / 231

Resident TM LTC Manual Drive Bed Specifications
Chapter 1: Introduction
Resident
TM
LTC Bed Service Manual (man136rc) Page 1 - 13
1
Mattress Stop
A separate mattress stop is not available on the manual drive version of the
Resident
TM
LTC manual drive bed. The foot panel acts as a mattress stop on this
version preventing the mattress from sliding towards the foot end of the bed.
Mattress Configurations
There are several mattress configurations available for the Resident
TM
LTC
manual drive bed. These configurations are indicated in table 1-2 on page 1-13.
Table 1-2. Mattress Options
Head and Foot Panels
The head and foot panels fit over two vertical post type mountings located at
each end of the bed and are removable by lifting vertically. The hand cranks
must be detached from the manual head, knee, and hilow drive assemblies
before the foot panel can be removed. These panels provide ease of bed
mobility and steering control.
Drainage Bag Hooks
Drainage bag hooks are located on both sides of the bed beneath the sleep
surface frame near the seat section.
Mechanical Description
The Resident
TM
LTC manual drive bed is manually adjusted by manipulating
the head, knee, and hilow drive assemblies.
Caregiver manual crank controls are located at the foot end of the bed (see
figure 1-8 on page 1-14). These crank handles allow the caregiver to manually
operate the head section, knee section, and hilow (bed height) to obtain the
desired elevation within their respective travel limits. They can be tucked away
in recesses in the footboard when not in use.
Product Number Description
P778 LTC mattress
P944 Comfortline
®
mattress
P783 Extended care mattress
P462 (P1416) Unbundled ZoneAire
®
(mattress)