Hill-Rom P870, Manual

Page: 37 / 231

Resident TM LTC Electric Drive Bed Specifications
Chapter 1: Introduction
Page 1 - 24 Resident
TM
LTC Bed Service Manual (man136rc)
1
is 36" x 80" (91.4 cm x 203.2 cm). The outer surfaces of the panels are formed
down to prevent sharp edges.
Mattress Stop
A mattress stop is located at the foot end of the spring frame. In its raised
position, the mattress stop prevents the mattress from sliding towards the foot
end of the bed.
Mattress Configurations
There are several mattress configurations available for the Resident
TM
LTC
electric drive bed. These configurations are indicated in table 1-4 on page 1-24.
Table 1-4. Mattress Options
Head and Foot Panels
The head and foot panels fit over two vertical post type mountings located at
each end of the bed and are removable by lifting vertically. These panels
provide ease of bed mobility and steering control.
Drainage Bag Hooks
Drainage bag hooks are located on both sides of the bed beneath the sleep
surface frame near the seat section.
Electrical Description
SHOCK HAZARD:
One of the risks associated with the use of electrical equipment
includes the potential for electrical shock. Train and educate personnel
on the risks associated with electrical equipment.
Product Number Description
P778 LTC mattress
P944 Comfortline
®
mattress
P783 Extended care mattress
P462 (P1416) Unbundled ZoneAire
®
(mattress)