Hill-Rom P870, Manual

Page: 157 / 231

4.18 Individually Operated Brakes
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 50 Resident
TM
LTC Bed Service Manual (man136rc)
4
4.18 Individually Operated Brakes
Tools required: Ratchet with 3" extension 1/2" socket
1/2" wrench 3/4" socket
Pin punch Hammer
Jack stands
Removal
1. Use jack stands to block up beneath the bed’s main frame to raise the caster
frame high enough to allow for brake assembly removal.
WARNING:
It is not advisable or necessary for personnel to have their entire body
below the sleep surface and within the confines of the bed. If service
personnel need to get under the bed, use suitable jackstands to block
up the bed frame as an added precaution.
2. Remove the locknut (C) and bolt (H) (see figure 4-34 on page 4-50).
Remove the brake pad (G) and the lower tube (E) downward from the
assembly.
Figure 4-34. Individually Operated Brakes
m136_077