Hill-Rom P870, Manual

Page: 89 / 231

2.10 Automatic Contour Does Not Function Correctly
Chapter 2: Troubleshooting Procedures
Page 2 - 38 Resident
TM
LTC Bed Service Manual (man136rc)
2
2.10 Automatic Contour Does Not Function Correctly
1. The bed is plugged into the appropriate power source.
Yes No
↓ →
Connect a good power cord to the wall outlet (see figure 2-34 on
page 2-44).
2. Ensure that the control lockout knobs for the knee (A) and the automatic
contour (B) are in the unlocked position.
Yes No
↓ →
Turn the knob(s) to the unlocked position.
Figure 2-29. Control Lockout Box Knee and Automatic Contour Functions
3. With the bed in its flat position, press and hold the HEAD Up button. Both
the head and knee sections elevate at the same time until the knee section
reaches approximately 15
o
. Continuing to depress the HEAD Up button
causes the head section to elevate until it reaches maximum inclination.
The knee section stops at approximately 15
o
.
Yes No
↓ →
Go to step 5.
A
B
C
m136_028