manualshive.com logo in svg

Hill-Rom P870, Manual

Share
Download
Hill-Rom P870 Manual Download Page 229

7.11  Comfortline® Mattress (P1433)

Chapter 7: Accessories

Page 7 - 16

Resident

TM

 LTC Bed Service Manual (man136rc)

7

7.11 Comfortline

®

 

Mattress (P1433)

A 5" (12.7 cm) thick Comfortline mattress is available as an accessory.

Installation

Tools required:

None

1. Remove the existing mattress from the bed.

2. Remove the shipping wrappings from the Comfortline mattress.

3. Place the Comfortline mattress on the sleep surface with the label “head 

section” at the head end of the bed.

4. Raise the mattress stop at the foot end of the bed to keep the mattress from 

sliding toward the foot panel.

7.12 Ambulatory Assist Rail (P441A)

The ambulatory assist rail is available as an accessory to aid the resident when 
getting into or exiting the bed.

Summary of Contents for P870








































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands