Hill-Rom P870, Manual

Page: 67 / 231

Function Checks—Electric Drive Model
Chapter 2: Troubleshooting Procedures
Page 2 - 16 Resident
TM
LTC Bed Service Manual (man136rc)
2
18. With the bed in the automatic contour position (see figure 2-10 on page
2-16), operate the head down function. Pressing the HEAD Down button
(with the head section inclined above 15
o
) causes the head section only to
lower. Continuing to press the HEAD Down button causes the knee section
to begin lowering. Lowering of both sections continues (with the HEAD
Down pressed) until the flat position is reached. Releasing the HEAD
Down button before the flat position is reached causes both sections to stop
moving.
Yes No
↓ →
Go to RAP 2.10.
Figure 2-10. The Resident
TM
LTC Bed in the Automatic Contour Position
19. Turn the control lockout box knob for each function (one at a time) to the
locked position (A), and attempt to operate that function (see figure 2-11
on page 2-17). Only the locked function (hilow, head, knee, and automatic
contour) is prevented from operating, and the unlocked functions operate
normally. (However, the automatic contour will not operate if the knee or
automatic contour is locked.)
Yes No
↓ →
Go to RAP 2.11.
m136_003