manualshive.com logo in svg

Hill-Rom P870, Manual

Share
Download
Hill-Rom P870 Manual Download Page 143

4.11  Control Box

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 36

Resident

TM

 LTC Bed Service Manual (man136rc)

4

4. Slide the plastic door (D) towards the center of the bed, and remove this 

door (for access to a hidden mounting screw).

5. Remove the hidden mounting screw (securing the control box to the hilow 

motor actuator.

6. Slide the control box toward the center of the bed, and remove it from the 

hilow motor actuator.

Replacement

1. Assemble in reverse order.

2. Ensure that the base of the control box correctly engages its mounting 

slides on top of the hilow motor actuator. The hilow motor actuator 
connecting pin must align with its receptacle in the control box.

CAUTION:

The hilow motor actuator connecting pin must align with its receptacle 
in the control box. Equipment damage may occur.

3. Ensure that all cables are properly connected to the control box.

4. Perform an operational check of the hilow, head, and knee functions. See 

“Function Checks—Electric Drive Model” on page 2-10.

Summary of Contents for P870








































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands