Hill-Rom P870, Manual

Page: 145 / 231

4.12 Siderails
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 38 Resident
TM
LTC Bed Service Manual (man136rc)
4
Figure 4-27. Head Section Siderails With Controls
5. Raise the siderail.
6. Remove the two torx head screws (B), taking care not to drop the siderail.
7. Remove the entire siderail assembly downward from the sleep surface
frame assembly.
Replacement
1. With the siderail control correctly installed (if appropriate) and the
mounting plate (F) inserted into the siderail, position the siderail assembly
beneath the sleep surface frame assembly. The siderail release latch (E) is
to be toward the center of the bed.
2. Ensure that the guide pins (C) on the mounting plate (F) correctly enter the
holes in the sleep surface frame at (D).
3. Install the torx head screws (B) and tighten securely.
4. If the siderail has caregiver and resident controls:
a. Route the siderail control cable (A) along the main frame, and connect
it to the control lockout box.
b. Install cable ties to secure the siderail control cable to the cable channel
where it will not be damaged during bed operation.
A
B
F
C
D
E
m136_048