manualshive.com logo in svg

Hill-Rom P870, Manual

Share
Download
Hill-Rom P870 Manual Download Page 121

4.3  Manual Knee Drive Assembly

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 14

Resident

TM

 LTC Bed Service Manual (man136rc)

4

Figure 4-11.  Removal of the Knee Drive Assembly from Thigh Section Yokes

7. Remove the hair pins from anchor points on the bed frame crossbar, then 

remove the knee drive assembly (see figure 4-12 on page 4-14).

Figure 4-12.  Removal of the Knee Drive Assembly from the Frame Crossbar

Replacement

1. Using lithium grease, lightly grease the knee screw assembly threads.

2. Attach the knee drive assembly to the bed frame by inserting two hair pins 

through the anchor points (see figure 4-12 on page 4-14).

3. Position the end of the knee drive assembly in the yokes on the thigh 

section. Insert a pin through the yokes and through holes at the end of the 
knee drive assembly. Secure with one rue ring cotter.

m136_123

A

B

m136_125

Summary of Contents for P870








































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands