Hill-Rom P870, Manual

Page: 134 / 231

4.8 Optional Siderail Control Panels
Chapter 4: Removal, Replacement, and Adjustment Procedures
Resident
TM
LTC Bed Service Manual (man136rc) Page 4 - 27
4
4.8 Optional Siderail Control Panels
Tools required: Phillips head screwdriver T25 torx head screwdriver
Diagonal cutters
Removal
1. Unplug the bed from its power source.
SHOCK HAZARD:
Unplug the bed from its power source. An electrical shock hazard
exists.
2. Disconnect the siderail control cable from connection (A) at the control
lockout box (see figure 4-21 on page 4-27).
Figure 4-21. Location Of Siderail Control Cable Connections At Control Lockout
NOTE:
Record the cable routing and placement of cable ties for replacement purposes.
3. Remove the attached cable ties.
4. Carefully peel the hilow label (A) from the outer surface of the siderail
control (R) and the head/seat label (I) from the inner surface of the control
(G) (see figure 4-22 on page 4-28).
CAUTION:
Use care when removing the siderail labels to prevent damage.
Replace damaged labels with new ones.
A
A
m136_068