Hill-Rom P870, Manual

Page: 61 / 231

Function Checks—Electric Drive Model
Chapter 2: Troubleshooting Procedures
Page 2 - 10 Resident
TM
LTC Bed Service Manual (man136rc)
2
Function Checks
—
Electric Drive Model
1. Initial Actions have been performed.
Yes No
↓ →
Go to “Initial Actions—Electric Drive Model” on page 2-9.
2. Inspect the brake pads for wear. Both brake pads are in good condition.
Yes No
↓ →
Go to RAP 2.1.
3. Apply the brakes by pressing the brake pedals (A) (see figure 2-3 on page
2-10). The brake is applied correctly, and the swivel casters do not roll. If
the brake design has interconnecting linkage, both brakes are applied when
either pedal is depressed.
Yes No
↓ →
Go to RAP 2.1.
Figure 2-3. Brake Pedal and Release Lever
4. Press the brake release lever (B) to release the brake. The brake releases
correctly, and the swivel casters roll freely. If the brake design has
interconnecting linkage, pressing either of the brake release levers releases
both brakes.
Yes No
↓ →
Go to RAP 2.1.
A
B
m136_010