HappyJapan HCR3-1502, Maintenance Manual

Page: 153 / 216

15 3
E5-5 Setup Machine setting
<NOTE> ( *: Setting is for each indivisual machine, so prohibit to change setting. When you need to chage it, please contact us in
advance)
( $ : Setting is different for each model type. Please check before changing data)
( # : Setting is depending on options installed. Please check before changing data)
Contents
＊
1 Machine Type : HCR3
＊
2 Max Needle Number : 15 (1-15) : Number of Needle
$ 3 Max Head Number :
□
(1-30) : Number of Head
$ 4 Machine Max Speed :
□□□
(500-2000) : Maximum rotation
$ 5 Machine Max Area X :
□□□
(0-15000) : Maximum embroidery area at X axis
＊
6 Machine Max Area Y : 4500 (0-15000) : Maximum embroidery area at Y axis
$ 7 X Position Sensor :
□
(0-12) : Number of position sensor at X axis
＊
8 Y Position Sensor : 6 (0-12) : Number of position sensor at Y axis
# 9 LED Needle Pointer : No : Use of LED Pointer Yes or No
#10 Safety Sensor : No. : Use of safety sensor ( rear )Yes or No ( To be determined )
#11 N.Safety Sensor : No. : Use of safety sensor (front) Yes or No
#12 Clip Holder Device
：
No : Use of Clip holder device YES or NO
＊
13 Borer Device : No. : Use of Borer device Yes or No
＊
14 Cutter Unit Type : PulseMtr : Thread cutting unit type
＊
15 X Start Base Angle : 60 (20-90) : Starting angle of frame movement on X axis
＊
16 Y Start Base Angle : 60 (20-90) : Starting angle of frame movement on Y axis
＊
17 X Start Angle(CAP)
：
40 (20-90) Starting angle of frame movement on X axis for cap frame
＊
18 Y Start Angle(CAP)
：
40 (20-90) Starting angle of frame movement on Y axis for cap frame
$19 Color Change Speed
：
Slow1 (Normal / Slow1 ~ Slow4) Speed of needle bar change
＊
20 Brush Data [*0.1mm]
：
200 (0-250)
Distance of thread brush (mm) after thread cut
(1:0.1mm , 200:20.0mm
…
250:25.0mm)
# 21 Clip Close Timing
：
250 (0-1000) Close timing of Clip when Thread trim (ms)
Set to 250 when the Clip holder device is Yes.
＊
22 Border Overlap
：
8 (0-8) Overlap of between heads for border frame
＊
23 Trace Needle No.
：
1 (1-15) Needle Number for Trace
＊
24 Device Com. Speed
：
19200bps (2400-115200) Communication speed for Sequin device and Cording device
# 25 Sequin Dev. Left
：
No Use of left side Sequin device Yes or No
# 26 Sequin Dev. Right
：
No Use of right side Sequin device Yes or No
# 27 Sequin Dev. Type
：
Other (Happy) Type of Sequin device
# 28 Number of 3-Needle
：
0 (0-15) Needle number of 3-Needle device