Operating Manual HG G-98830YA | English, Revision 02 | Date: 21.06.2021
107
Index – Chapter 19
selection of the reception channel for code transmis
sending a control message (heartbeat) ..............................68
serial interface................................................................................35
(S)erial Output ........................................................................ 52, 53
service interface ............................................................................ 35
set byte order.......................................................................... 65, 68
set number of codes to be compared .................................58
setting character delay time (3964R) ..................................55
setting identifiers for message objects...............................63
setting remote operation...........................................................65
setting the acknowledgement delay time ......................... 55
Setting the byte order................................................................. 54
setting the CAN baud rate ........................................................64
setting the duration of the positioning impulse.............. 59
setting the interval of data transmission............................56
setting the number of positioning pulses .......................... 59
setting the operating states of the PDOs........................... 67
setting the output behavior......................................................64
setting the output telegram .....................................................54
setting the output type...............................................................55
setting the receive frequency.................................................. 61
setting the switch-off behavior of the positioning
pulse ........................................................................................... 59
setting the threshold for generating the RX_NOISE
setting the threshold for the scan coils...............................60
setting the timeout time (transparent)................................55
setting the voltage for code decoding and position
calculation................................................................................58
setting the voltage for the positioning pulse output.....59
sidebands.......................................................................................... 61
signal strength................................................................................86
software update ............................................................................ 74
specialist ........................................................................................... 12
status messages............................................................................ 51
storage............................................................................................... 22
switch transmitter on/off for control purposes............... 62
symbols ................................................................................................8
system commands....................................................................... 38
system components .................................................................... 16
system monitor..............................................................................48
system status..................................................................................69
system variables............................................................................51
T
target group........................................................................................6
technical data .................................................................................83
telegrams
select the frame.....................................................................63
terminal program ..........................................................................32
configuration...........................................................................32
test drive, diagram........................................................................82
thresholds.........................................................................................79
(T)ime & Code......................................................................... 56, 57
track guidance................................................................................19
trade marks................................................................................... 108
transparent........................................................................36, 48, 88
timeout time............................................................................55
transponder ...........................................................14, 16, 23, 100
minimum distance to antenna........................................25
mounting ..................................................................................23
operating conditions............................................................23
trouble shooting.............................................................................78
tune antenna once (command) ..............................................38
tuning the transmitting antenna ............................................62
U
update ................................................................................................74
(U)pdate Firmware........................................................................72
update program
operating elements..............................................................75
user qualification...........................................................................12
V
validity of the operating manual................................................6
W
(W)rite Transponder.....................................................................71
Y
(Y) display Histogram ..................................................................71
