Operating Manual HG G-98830YA | English, Revision 02 | Date: 21.06.2021
16
Chapter 4 – Device Overview
4
Device Overview
4.1 System Components
An Automated Guided Vehicle (AGV) requires at least one antenna, connection ca
-
bles to the vehicle electronics and transponders in the ground. Optionally, you can
use a transponder programmer.
If the vehicle manufacturer or the plant operator does not yet have a controller for
calculating the paths of the vehicle, we recommend the navigation controller from
Götting.
Figure 3
System components (excerpt)
4.2 Components in the Ground
4.2.1 Transponders
Transponders with trovan® coding are used as reference marks for the track guid
-
ance (see 3.1 „Required Accessories“ on page 14). Further documents can be ob
-
tained from our Internet server (see 1.1.2 „Additional Applicable Documents“ on
page 6).
1
Transponder antenna HG G-
98830YA
Transponder for mounting in or on the
roadway:
2
Disc transponder (usually on the
track)
3
Rod transponder (usually in the
ground)
1
2
3
