Operating Manual HG G-98830YA | English, Revision 02 | Date: 21.06.2021
69
Configuration of the System via the Service Interface – Chapter 10
10.2.10 (D)isplay Systemstatus
In the menu
(D)isplay Systemstatus
, you can output the value of the status bit (see
Table 9 on page 37). All status values that are set are displayed. As soon as a value
is reset, it is hidden again.
To switch from the main menu to the menu
(D)isplay Systemstatus
:
Press the key
.
To exit the display:
Press the key
.
The main menu is shown.
10.2.11 Cs(v)
Figure 31
Example of a CSV text file
For diagnostic purposes, you can output the following values in CSV format to read
them into spreadsheets, for example:
Code
U
Reference
X-, Y-DEVIATION
the states of
Transponder in the field
(see Table 9 on page 37)
CODE_OK
(see Table 9 on page 37)
SEGMENT-
(see Table 9 on page 37)
POSIPULSE
(see Table 9 on page 37),
Number of code readings,
Number of false readings
A telegram counter
The output is at 38.400 Baud, 8 Bit and even parity.
To switch from the main menu to the menu
Cs(v)
:
Press the key
.
